Machine Gun Flasher 1
Screen Shot 2015-04-03 at 12.25.02

Machine Gun Flasher

The Gun Flasher can operate up to 4 L.E.Ds to simulate either a cannon or machine gun effect. The unit can work manual mode or in auto mode.

All of the firing effect can be modified to suit your requirements. The L.E.Ds get there power from the receiver battery, but their power consumption is very low.

£16.95

Features

Firing speed is adjustable.

Can have repeating intermittent or continuous fire.

Burst fire parameters are adjustable.

Selectable operating switch direction.

Factory default reset option.

Instructions

The Machine Gun Unit can be made to realistically imitate Machine-gun or Cannon fire. The default is for the output to fire continuously while the operating switch is held. If required, the unit can repeatedly fire in bursts of up to about eight seconds. The pause between the bursts is adjustable and can also be up to about eight seconds.

Connect the Machine Gun Unit to the selected channel on your receiver and wire the output to the diagram below paying particular attention to the battery polarity.

FIRE REPEAT SPEED

Press the “+” and “-” keys together while the unit is on until the set-up LED lights continuously to confirm that set-up is active. To increase the gun repetition speed, press and release the “+” key.   The speed will change by one step with each press. Use the “-” key to decrease the repetition speed in the same way. Exit the set-up by pressing both keys together. The set-up LED will go out and the gun will fire at the new speed.

INTERMITTENT FIRE PAUSE TIME

Press hold and release the “-” key while the unit is on. The set-up LED will flash slowly to confirm that the pause time set-up is active. During set-up, the gun fires for a fixed period of about a second and then pauses according to the previous set-up. Press and release the “+” key to increase the pause time. The pause time will increase by one step with each press. Use the “-” key to reduce the pause time in the same way. Pause times up to about eight seconds can be set. Exit the set-up by pressing both keys together. The set-up LED will go out and the unit will operate with the new pause time.

INTERMITTENT FIRE BURST TIME

Press hold and release the “+” key while the unit is on. The set-up LED will flash rapidly to confirm that the burst time set-up is active. During set-up, the gun fires in bursts according to the previous set-up with a fixed pause of about a second. Press and release the “+” key to increase the burst time. The burst time will increase by one step with each press. Use the “-” key to reduce the burst time in the same way. Burst times of up to about eight seconds can be set. The time between bursts remains the same. Exit the set-up by pressing both keys together. The set-up LED will go out and the unit will operate with the new burst time.

TOGGLE SWITCH DIRECTION

Switch the transmitter on. Press and hold the “+” key and switch the unit on to toggle the operating switch direction between normal and reversed. The set-up LED will flash when the operation is complete and go out when the key is released. Hold the key until the LED flashes.

TOGGLE OUTPUT MODE

Switch the transmitter on. Press and hold the “-” key and switch the unit on to toggle the output between continuous and burst mode. The set-up LED will flash when the operation is complete and go out when the key is released. Hold the key until the LED flashes.

FACTORY RESET

Switch the transmitter on. Press both keys and switch the unit on. The set-up LED will flash when the reset is complete and go out when the keys are released. Hold the keys until the LED flashes.

SAFETY

Please ensure that the set-up keys cannot be pressed accidentally while the unit is in use

Additional Information

Dimensions 35 x 18 x 8 mm