MRW45 4 L.E.D Random Flasher

Features

L.E.D’s are powered from the receiver battery pack.

L.E.D’s run in a random fashion.

Dropper resistors are inbuilt.

Instructions

Plug the unit in to the channel you have chosen to switch the Random L.E.D’s and then wire up L.E.D’s you want to flash in a random fashion.

Operating the unit

First it is recommend that set the channel you are using to switch the L.E.D’s to 100% travel, once this is done

the L.E.D Light Switch will switches on around 75% of the travel channel you are using.

In operation the Random lights will start and stop when the switch or stick on the channel is move to the short end (1.00ms) of the channel and then returned to the centre, i.e. 1.5ms or less.